What is the standard Nokia password for all phones? I forgot the security code on from 6 01.

To generate an unlock code for your phone, we need a number IMEI your phone. To find out the IMEI number, dial *#06# on the keyboard, or remove the battery from the phone. IMEI is written on the information label (15 digits).

How to Unlock Nokia 6:

1. Turn on the phone with an unsupported SIM card *.

2. Dial your SIM PIN, if available.

3. Your phone will ask you to enter your Sim-Lock PIN.

4. Enter the code and confirm.

5. The phone is already without Sim-Lock.

* unsupported SIM card - different than the one the phone is currently working with.

FAQ:

What is Remote Phone Unlock?

Remote unlocking of the phone is to type on the keyboard a unique code supplied by our service. You will complete this operation quickly, it is as simple as counting 1 2 3. After completing the order, the customer will receive a unique unlock code provided by the phone manufacturer or mobile operator by e-mail. The condition for the proper provision of the service is the provision of the correct IMEI number. This number is best found by dialing *#06#. After entering the appropriate code into the phone, the phone will be unlocked. Once entered the unlock code removes the lock forever. The lock will not appear again, for example, after updating the phone software, and there is no need to enter the code again after replacing the SIM card with a new one from another operator. Remote phone unlock does not require any cables or additional software. Unlocking your phone with a code is the easiest way to get rid of your restrictions.

Is it safe Unlock Nokia 6?

The removal of restrictions set by the operator by entering a special unlock code was provided by the phone manufacturer itself. Thus, it is a proven and safe, as well as an effective way to unlock your phone. This method does not require any changes or technical knowledge to be introduced into the phone.

Will removing Sim-Lock void my warranty?

Removing restrictions placed on the phone does not void the warranty. The ability to enter an unlock code was provided by the phone manufacturer, and this operation does not affect the warranty. All phones leaving the factory do not have locks. Blocking is set by mobile operators. By removing this restriction, you will restore the original phone settings (factory reset).

Is it possible to unlock Nokia 6?

No, the latest phone models cannot be unlocked using free methods. Phone manufacturers and mobile operators receive additional income from the distribution of unlock codes. The simplest and most effective method of unlocking a phone is to enter a code supplied by the phone's manufacturer or carrier. Each phone requires a special code related to the phone's unique IMEI number. Using free code generators or entering a code related to a different IMEI number will block the counter. This is due to the higher cost of unlocking the device, or may lead to its complete blocking.

Is it possible to unlock a phone locked under any operator?

For Nokia 6 Unlock phones, the lock can be unlocked independently of the GSM network.

What if there is no code for my phone??

If there is no code for a specific IMEI number, the customer will immediately receive a full refund of the amount paid.

ask your service provider for

special message.

You can change general settings

device, such as language settings,

standby, display and

keyboard lock.

Access codes

In case of loss of any of the codes

access, contact your service provider.
PIN code (personal

identificational

code) - protects the SIM card from

unauthorized

use. PIN code (4-8 digits)

usually provided with the SIM

card. If you enter an incorrect PIN

code three times in a row this code

blocked, and to unlock it

PUK code required.

UPIN - usually provided

along with the USIM card. USIM card is

extended version of the SIM card,

which is supported by mobile

3G phones.

PIN2 code - this code (4-8 digits)

provided with some SIM

cards and is required to access

certain functions of the device.

Lock code (5 digits) called

also a security code, - code

lock is used to protect

devices from unauthorized

use. by manufacturer

code 12345 is set. You can create and

change the code and also include

code request function. keep new

code in a safe and secure place

separate from the device. If you forgot

code and device blocked,

service call required

support. May be required

extra charge, moreover,

possible deletion of your data from

devices. Additional

information can be obtained from

Nokia Care Service Center or

company that sells

devices.

PUK code (personal

unlock key) and PUK2-

code - (8 digits) required for

changing a locked PIN

and PIN2 codes, respectively. If these

codes not provided with SIM

card, they can be obtained from the operator

cellular network, which provided

SIM card installed in the device.

UPUK code - (8 digits) required for

change blocked UPIN-

code. If this code is not provided

together with a USIM card, it can be

obtain from the network operator,

who provided the USIM card,

installed in the device.

International number

hardware ID

mobile phone number (IMEI) - This number

(consisting of 15 or 17 digits)

used to identify

allowed devices in the GSM network. For

devices that, for example, were

stolen, access to the network can be

block. Device IMEI number

listed under the battery.

Remote lock

You can block remotely

device using

predefined text

messages. In addition, remote

you can block the memory card.

Finding Help Information 11

Nokia
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]

*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]
To access the service menu of the device, dial *3001#xxxxx#, where xxxxx is the security code (security code), which is 12345 by default. Thus, to enter the menu, you will need to dial *3001#12345# In this mode, for example , you can change the name of the network operator displayed in the standby mode. To do this, select NAM1, scroll to the Alpha Tag sub-item, change it as desired (for example, write Vovochka and press OK. Exit the mode by turning off and on the phone.
It is possible that this code works on other phone models (51xx, 61xx).

*#0000# - birthday and software version of the phone
* # 06 # - imei on many phones
* # 92702689 # - some kind of * twisted menu - I don’t know why
* # 3370 # and * # 3370 * - on and off the quality of communication - like that, but this crap is not supported by all operators. Nokia itself had v 5.79 flashed

service code NOKIA 5120&5125:
In addition to the above, there are a couple more SERVICE CODE
1) *#639#(*#NEW#) is used to add a number, i.e. you can register several phone numbers and switch between them.

2) *#92772689#(*#WARRANTY#)
1) Serial number
2) Release date
3)Date of reprogramming
4) Date of last repair.
5) Includes data transfer
6) Total talk time.

3) *#837# or *#VER# phone version (not supported by all models)

4) *#9999# or *#6120# softa version (not supported by all models)

before changing anything in the settings
WELL THINK IF YOU CAN RETURN THEN EVERYTHING TO THE PLACE
PARTICULARLY IN POINT 1
It is not possible to change the name of the operator on all NOKIA models in the latest models, this feature is blocked by the manufacturer.
the only (almost) plus of this service code * # 3001 # 12345 # is the ability to recover the "Forgotten" password to turn on the mobile.
And the second plus - you can see the level of the received signal.
NOKIA 2110
Show EMEI number *#06# >
Show phone software version *#9999# > or for 2110i *#170602112302# > or *#682371158412125# >
Show phone production date *#3283# >

3110
Show EMEI number *#06# >
Shows software version *#3110# >
Restores factory settings *#7780* >
Entering the special menu *#92702689# > Commands in the special menu:

5110
To reduce electricity consumption, you can turn off the EFR (Enhanced Full Rate) # 3370 # >
To enable the EFR function *3370# >
To reduce the battery discharge rate and enable the HR (Half Rate) function *4720# >
To enable the HR function #4720# >
To disable SP encodings (provided that the machine's PIN code is enabled): When prompted for a PIN code, press "C", then either "up arrow" or "down arrow". Press "C" until the display is clear. Then enter the command to change the PIN code, but do not actually change it - **04*PIN*PIN*PIN# > The only problem is that this procedure will have to be repeated every time the device is turned on.

6110
To reduce electricity consumption, you can turn off the EFR (Enhanced Full Rate) # 3370 # >
To enable the EFR function *3370# >
To reduce the battery discharge rate and enable the HR (Half Rate) function *4720# > then turn the phone off and on again.
To enable the HR function #4720# >
To view IMEI number *#06# >
Show software version *#0000# >
Entering the special menu *#92702689# > Commands in the special menu:
6232 OK shows the month and year of manufacture
7332 OK shows the date of the last change in the program
7832 OK shows sale date (if entered)
37832 OK, you can enter the date of sale MMYY (careful! cannot be changed later)
9268 OK shows serial number (IMEI)

7110
View firmware version *#0000# >
View IMEI *#06# >
Entering the service menu: * # 92702689 # > By successively pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2MM/YY (release date)
3 Date of purchase (here you can enter the date of purchase if your phone is new. Remember that the date is entered once and if you entered the wrong date, then it will be impossible to correct it later!
4 Date of repair (if repair was carried out)
5 Date handed over to user? ATTENTION: to exit this mode, you must turn off and then turn on the device.
Checking if the card supports SIM-clock-stop mode (only for firmware version 5.24 or later) *#746025625# >
Enable Enhanced Full Rate Codec (EFR): *3370# > will be enabled after phone reboot (uses more power) Disable Enhanced Full Rate Codec (EFR): #3370# > and EFR will be disabled after phone reboot
Enable Half Rate Codec: (only available for firmware version 4.33 or earlier) enter *4720# >and Half Rate mode will be enabled after phone reboot Disable Half Rate Codec: enter Enable #4720# >and Half Rate Codec will be deactivated after phone reboot

Smartphones

* # 06 # - IMEI of the smartphone (IMEI number - consists of 15 digits, it is unique and every phone has it). This number must match the number on the box.
*#0000# - firmware number
safe mode ("PENCIL"+Power)
*#7780# - restore original (working) smart settings
*#7370# - reset smart to factory settings (i.e. all software, contacts, calendar, etc. are deleted - smart becomes clean!)
ATTENTION! To use the last two codes, you will need to enter the phone lock code (default 12345)!
Safe Mode when you turn on the phone - "PENCIL" + "Power Buttion"
Loading in Safe:
1. Turn off your phone
2. Press "PENCIL" (and DO NOT release)
3. Press the power button
4. Hold the "PENCIL" until the FULL load!!!
*#2820# - unique address of the Bluetooth module of your device (may be needed by other devices that cannot display names).
*#7370925538# - cleaning "Wallet" (for 6600 and above - which have "Wallet").
*3370# (phone must reboot) improves sound quality (using EFR) but reduces battery life.
#3370# - resets the sound quality to normal (cancels *3370# code).
EFR CODEC (Enhanced Full Rate)
This feature, when enabled, should, in theory, significantly improve the quality of the transmitted speech, but, unfortunately, it must be supported by the mobile operator. When it works, the power consumption of the phone in talk mode slightly increases (about 5%). As far as we know, none of the Russian mobile operators support this feature. The principle is based on a different speech compression algorithm (ACELP) and occupies a wider frequency band.
*4720# - enable Half Rate Codec (HFR)
#4720# - disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly degrades the quality of speech, but saves the battery by about 30%. Again, must be supported by the cellular operator.
*#92702689# - enter the service menu [*#war0anty#]

Secrets of NOKIA 6600 and other Smartphones

*#06# - smartphone IMEI

*#0000# - Firmware number

* # 7780 # - Restoring the original (working) settings of the smartphone

* # 7370 # - Reset the smartphone to factory settings (all software, contacts, calendar, etc. are deleted - the phone becomes clean)

*#2820# - Bluetooth code (unique address of the Bluetooth module)

*#7370925538# - cleaning "Wallet" (for 6600 and above - and which have "Wallet").

Safe Mode when you turn on the phone - "ABC" + "Power Buttion" (in 3650 "ABC" is "pencil")

Loading into Safe:

1. Turn off your phone
2. Press "ABC" (and DO NOT release)
3. Press the power buttons
4. Hold "ABC" until the phone is FULLY loaded !!!

And here is another additional way to format the phone (with the loss of all data), in case you can’t even dial the coveted code * # 7370 # or even start the phone: in the off state, hold down three keys at the same time, green for answer, asterisk and key "3". And now turn on tryby without releasing the keys. Formatting will start.

To use the codes *#7780# and *#7370#, you will need to enter the lock code (default 12345).

##002# cancel all redirects.

**004*number# enable forwarding of all calls to the entered number.

Secrets of NOKIA 3210, 3310, 3330, 8210, 8250, 8850, 9110

Shows the serial number of the phone (IMEI)
*#06#

Software Version
*#0000#

1 line - Version
2 Line - Date of release of the program. providing.
Line 3 - Phone type.

Warranty codes:
*#92702689# (= *#war0anty#)
You will be prompted to enter a "warranty code" type,

The service menu will appear on the screen:
IMEI (International Mobile Equipment Identification)
Phone release date MM/YY
Phone purchase date
Date of repair
Pass user data?

*3370# - Activation of the full-size coding mode (Increases the quality of communication, reduces battery life)

#3370# - Deactivation of the full-size encoding mode.
Note: After entering these codes, the phone will restart with the new settings.

Check if you can stop SIM Clock:
*#746025625# (= *#sim0clock#)

Codes for determining whether LOC is installed on the device or not
Your Nokia can be blocked by 4 types of locks:
SPROVIDER-LOCK - 1
NETWORK-LOCK-2
COUNTRY-LOCK - 3
SIMCARD-LOCK - 4

To check the status of these locks, enter the line:
#pw+(MASTERCODE)+(y)# where
- p = press * 3 times
- w = press * 4 times (in the original, on the contrary, w - 3 times, p - 4)
- + = press * 2 times
- MASTERCODE = exactly the thing that locked your device. But to check the status, enter 1234567890
- y = number from 1 to 4

If the phone is locked by an SP (Service Provider) code that is unknown, then try the following:

1. Pin code request must be enabled;
2. turn on the phone;
3. when prompted for a Pin code, press C, then the up or down arrow;
4. press C and hold until the display clears;
5. now enter the command to change the Pin code, but without changing it;
**04*Pin*Pin*Pin#
This operation must be repeated each time the machine is turned on.

Half Rate Codec:
Inclusion:
*4720# - Half Rate will be activated after the phone is rebooted (power consumption decreases)
Shutdown:
#4720# - Half Rate will be disabled after rebooting the phone
Enhanced Full Rate mode allows you to get much better sound quality with the same number of bits of transmitted information, but loads your provider's network more, while the duration of the conversation is reduced by about 5%

Half Rate mode degrades the sound quality, but unloads the network and allows the provider to pass more calls through it, while the duration of the conversation increases by about 30%

Security code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (2 first digits = country code).
FAC = Final Assembly Code (For Nokia FAC=10).
SNR = Serial number.
SP = Spare (always SP=0).

**04*oldPIN*newPIN*newPIN# - Change PIN code

**042*oldPIN2*newPIN2*newPIN2# - Change PIN2 code

**05*PUK*newPIN*newPIN# - Unblock PIN code

**052*PUK2*newPIN2*newPIN2# - Unblock PIN2

*#35# - Check the blocking status of all incoming calls

**35*code# - Activate blocking of all incoming calls

#35*code# - Disable blocking of all incoming calls

*#33# - Check the blocking status of all outgoing calls

**33*code# - Activate blocking of all outgoing calls

#33*code# - Disable blocking of all outgoing calls

*#330*code# - Check the blocking status of all calls

**330*code# - Activate blocking of all calls

# 330 * code # - Disable blocking of all calls

Nokia code function

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line: Software Version, 2nd Line: Software Release Date, 3rd Line: Compression Type .
*#9999# Phones software version if *#0000# does not work.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that "All Calls" are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to .
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible .
*#7760# Manufacture code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on "All Calls" diverting to the phone number entered.
**61*number# Turn on "No Reply" diverting to the phone number entered .
**67*number# Turn on "On Busy" diverting to the phone number entered .
12345 This is the default security code .
press and hold # Lets you switch between lines.

Input of all "indications" directly one behind the other - without "blanks" (these serve only the better overview).
Code
last change Function/description/information
*# 06 #
12/16/03 Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
*# 0000 #
12/16/03 SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
*# 2820 #
16.12.03 Bluetooth (BT) device address indicate.
xx#
12/16/03 Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
A/from key
12/16/03 Short pressing for menu for switching between profiles
menu key
12/16/03 Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
Menu quick access
01/18/04 Over in the menu e.g. to point 3.1 arrive simply third enter (if the symbol a file is opened is for these and then in it started the first Programm/Icon).
Autostart go around
12/28/03 When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
#
02/15/04 Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
12345
12/16/03 ... is according to standard set the Nokia nokia-Sicherheitscode.
0000
12/16/03 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
0 - for a long time press
10/25/04 If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.

________________________________________ ________________________________________
Caution - starting from here the codes are "dangerous"
*#7370925538#
* # of res wallet #
12/28/03 ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
*# 7780 #
01/17/04 The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
Points of entrance (Provider dependent points of entrance and attitudes)
Bluetooth attitudes
Favorite
Allocation of the two keys (beside Navi keys) in the main menue
Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
SMS/MMS/E Mail attitudes
Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
*# 7370 #
01/21/04 Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)

This is "only" a soft format... Hard format with "green, 3, *"... see below.
Green*3
01/21/04 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!

Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting "on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and try again.
"only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
mixed
12/16/03 * # 92702689 #, then switch - system menu off (goes with me not)

The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
# EFR0 # (# 3370 #) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (# 4720 #) HRC switch off
SIM LOCK
12.01.04 Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status

The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc...

Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can be purged. I take over for it no adhesion or responsibility!

SMS tips
01/27/04 To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list .
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
Mark more simply
03/01/04 To Tipps & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick down.
call number transmission
01.01.04 * 31 # - ( CLIR - Calling LINE identification Restriction switches on for the general call number transmission )
# 31 # - switch off the general call number transmission
# 31 # [telephone number] - with the next call suppress the own call number (thus temporary)
* 31 # [telephone number] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energized of the Netz(betreiber).)

* 30 # - switch ( TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller )
# 30 # - switch off
* # 30 # - status query

This also partly goes with 6600 via Men: Attitudes - calls - own No. send...

The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) ( COLP - COonnected LINE identification presentation )
*76#-switch on
# 76 # - switch off

* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) ( COLR - COnnected LINE identification Restriction )
*77# - switch on
# 76 # - switch off
Call bypasses (call forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupations

U=61, 62, 67 can be parallel active

U=21 -> and then no more call signaling overwrites U=61,62 and 67! Service code (D):

D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services

D=22 all synchronous services

D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left

** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)

* # U ** D # - status of the bypasses query:
Input without ** D queries all services and bypasses

Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49.172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.

Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #

This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...
Knock/stops/parks/faults
01.01.04 Knocks is signaling a secondary call during a current discussion
*43# - switch on
# 43 # - switch off
* # 43 # - status query

This also partly goes with 6600 via menu: Attitudes - calls - knocking...

0 - reject while the discussion a knocking
1 - discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y)
2 - discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y)

0 - caller the busy condition signal

This also partly goes with 6600 via menus existing during the discussion.
call barrier
01.01.04 Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arrival transmissions
S=351 all arriving abroad

Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arrival transmissions switch off Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT tone of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link

*S**D# - einschalten der Anruf-Sperre
# S * * D # - ausschalten der Anruf-Sperre
*# S# - Status der Anruf-Sperre abfragen

Passwort fur Handy Sperre andern:
** 03 ** * * #
** 03 * 330 * * * #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen - Anrufsperre ...
PIN andern
01.01.04 ** 04 * * * #
** 042 * * * #

PIN entsperren: ** 05 * * * #
PIN 2 entsperren: ** 052 * * * #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen - Sicherheit - Telefon und SIM ...
Diverse Codes
02.02.04 Die folgenden Codes klappen nur in einigen (wenigen) Netzen/Netzbetreibern ... leider z.B. nothing im Vodafone D2 Netz (in Deutschland):
*#100# - Eigene Nummer (Own Number)
*#101# - HLR Number
*#102# - Switch Number
*#103# - Zeit im Netz (Network Time)
*#104# - Anrufbeantworter Nummer (Voice mailbox number)
*#105# - Switch number
*#147# - Letzter Anrufer (Last Caller)

#646# - Minutes Used: (646 spells "MIN")
*#1345# or *174# - Vodafone Prepaid balance

*78 - Do not disturb - nur in Nord America in GSM und CDMA Netzen moglich
*79 - Cancel (s.o.)

ANDROID secret codes for Nokia C6-01

DISCLAIMER: This information is intended for advanced users. It is not intended for ordinary users, hackers or mobile thieves. We will not be held responsible for the use or misuse of this information, including loss of data or damage to equipment. So use these codes at your own risk and for the good of the cause.

Code: - *#*#4636#*#*
This code can be used to get information about your phone and battery. The screen displays the following 4 menus:

* Phone Information
*Battery information
* Battery history
* Usage statistics

Code: - *#*#7780#*#*
This code can be used to reset factory settings. It will remove the following things:

* Google account settings that are stored in your phone
* System and application data and settings
* Downloaded apps

This will NOT delete:

* Current system software and related applications
* SD card files such as photos, music files, etc.

PS: After you enter this code, you will see a window prompting you to click the "Reset Phone" button. Thus, you get the opportunity to cancel your operation.

Code: - *2767*3855#
Think before entering this code. This code is used for factory reset. It will delete all files and settings including internal memory. It will also reinstall the phone's firmware.

PS: Once you enter this code, you will not be able to cancel the operation until you remove the battery from the phone. So think twice before entering this code.

Code: - *#*#34971539#*#*
This code is used to get information about the phone's camera. Shows the following 4 menus:

* Upgrade camera firmware in image (do not touch this option)
* Update camera firmware on SD card
* Get camera firmware version
* Get firmware update counter
WARNING. Never use the first option, otherwise your phone's camera will stop working and you will need to take your phone to a service center to reinstall the camera firmware.

Code: - *#*#7594#*#*
This code can be used to change the behavior of the End Call/Power button on your phone. By default, if you long press the button, a screen will appear asking you to select any option from Silent Mode, Airplane Mode, and Power Off. You can turn on direct shutdown by pressing this button, so as not to waste time choosing.

Code: - *#*#273283*255*663282*#*#*
This code opens the file copy screen where you can backup your media files such as photos, audio, video and voice memos.

Code: - *#*#197328640#*#*
This code can be used to enter service mode. You can run various tests and change settings in service mode.

WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use Menu button to run various tests)

*#*#232338#*#* - Show WiFi MAC address When connecting to the Internet, the subscriber's equipment is identified through the MAC address. It is needed in order to deliver data to a specific network node. The MAC address or physical address is used to uniquely identify devices on a local network. It is written at the factory to the permanent (non-volatile) memory of the device, such as a network card or router.

*#*#1472365#*#* - GPS test Nokia C6-01

*#*#1575#*#* - Another GPS test The satellite navigation system GPS (Global Positioning System) or the Global Positioning System (location), more precisely, its space segment, is a constellation of 24 satellites. The GPS system (official name - NAVSTAR) was developed by order and is operated by the US Department of Defense. In the 1980s, the system was opened for civilian use. The GPS system works in all weather conditions around the world 24 hours a day.

*#*#232331#*#* - Bluetooth test Nokia C6-01

*#*#232337#*# - Shows the Bluetooth device address

*#*#8255#*#* - This code can be used to start GTalk Service Monitor.

Codes for getting information about the firmware version:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number

Codes to run various factory tests:

*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version Nokia C6-01

STANDARD GSM CODES Nokia C6-01
These codes, dialed from a GSM phone, are used to enable and disable various standard features and services. Some of them duplicate menu functions, some do not.

Legend:
@ = send button (Handset, OK, YES, Navi)
** = turn on or activate
* = active
## = disable and deactivate
# = inactive

PIN CODE REPLACEMENT Nokia C6-01
Change PIN 1 **04*oldPIN1*newPIN1*newPIN1#@
Change PIN 2 **042*oldPIN2*newPIN2*newPIN2#@
Unblock PIN 1 **05*PUK*newPIN1*newPIN1#@
Unblock PIN 2 **052*PUK2*newPIN2*newPIN2#@

PUK - code that must be provided by the operator when buying a phone or connecting. In the absence of this code, or entering the wrong PUK ten times, your phone will be completely blocked!

SHOW IMEI Nokia C6-01
Show IMEI *#06# The abbreviation IMEI stands for International Mobile Equipment Identifier, which means "International Mobile Equipment Identifier". In other words, IMEI is a unique serial number of each GSM phone, which is automatically transmitted by the device to the operator's network when connected. That is, if someone inserts their SIM card into your stolen cell phone and makes at least one call, law enforcement agencies can find out through the telecom operator who the SIM card is issued to and seize the phone.

If the code received by entering this command and the code on the back cover of the phone do not match, then your phone may be "gray".

CALL FORWARDING Nokia C6-01
Deactivate all types of call forwarding ##002#@
Deactivate all conditional redirects ##004#@
Activate all conditional forwarding **004*phone_number#@

FORWARD ALL CALLS Nokia C6-01
Deactivate and Disable call forwarding to another number ##21#@
Deactivate call forwarding to another number #21#@
Set number and activate call forwarding to another number **21*phone_number#@
Activate call forwarding to another number *21#@
Check the status of call forwarding to another number *#21#@

FORWARDING IF YOU DO NOT ANSWER A CALL
Activate call forwarding to another number if the subscriber does not answer **61*phone_number#@
Deactivate and turn off call forwarding if the subscriber does not answer ##61#@
Deactivate call forwarding if the subscriber does not answer #61#@
Activate call forwarding if the subscriber does not answer *61#@
Check the status of call forwarding if the subscriber does not answer *#61#@

FORWARDING IF THE SUBSCRIBER IS OUTSIDE THE COVERAGE AREA
Activate call forwarding to another number if the subscriber is outside the coverage area **62*phone_number#@
Activate call forwarding if the subscriber is outside the coverage area *62#@
Deactivate and turn off call forwarding if the subscriber is outside the coverage area ##62#@
Deactivate call forwarding if the subscriber is outside the coverage area #62#@
Check call forwarding status if subscriber is out of coverage *#62#@

FORWARDING WHEN THE PHONE IS BUSY
Activate call forwarding to another number if the phone is busy **67*phone_number#@
Activate automatic call forwarding if the phone is busy *67#@
Deactivate and turn off call forwarding if the phone is busy ##67#@
Deactivate call forwarding if the phone is busy #67#@
Check the status of automatic call forwarding if the phone is busy *#67#@

SETTING THE NUMBER OF RINGS BEFORE ACTIVATE FORWARDING
N = 5-30 (seconds)
Set the number of rings **61*VoicemailNumber**N#@
Cancel previous installation ##61#@

Change password for call barring **03*330*oldPassword*newPassword*newPassword#@
Activate the barring of all outgoing calls **33*Password#@
Deactivate the barring of all outgoing calls #33*Password#@
Check barring status of all outgoing calls *#33#@

ALL CALL BAR Nokia C6-01
Activate barring all calls **330*Password#@
Deactivate barring all calls #330*Password#@
Check the status barring all calls *#330*Password#@

Barring all outgoing international calls Nokia C6-01
Activate the barring of all outgoing international calls **331*Password#@
Deactivate the barring of all outgoing international calls #331*Password#@
Check barring status of all outgoing international calls *#331#@

BARRIING ALL OUTGOING CALLS Nokia C6-01
Activate the barring of all outgoing calls **333*Password#@
Deactivate the barring of all outgoing calls #333*Password#@
Check the barring status of all outgoing calls *#333#@

Barring all incoming calls Nokia C6-01
Activate the barring of all incoming calls **35*PW#@ or **353*Password#@
Deactivate the barring of all incoming calls #35*PW#@ or **353*Password#@
Check barring status of all incoming calls *#35#@ or *#353#@

BANNING ALL INCOMING CALLS WHILE ROAMING
Activate the barring of all incoming calls while roaming **351*Password#@
Deactivate the barring of all incoming calls while roaming #351*Password#@
Check the barring status of all incoming calls when roaming *#351#@
Activate call waiting *43#@
Deactivate call waiting #43##@
Check call waiting status *#43#@

SENDING or BANING SENDING YOUR PHONE NUMBER WHEN CALLING
Prevent sending your phone number #30#phone_number@
Allow sending your phone number *30#phone_number@
Check the status of sending your phone number *#30#

CODES FOR SENDING/BANNING NUMBER IDENTIFICATION FOR INCOMING CALLS
Prevent the display of the caller's number on your phone *77#
Allow display of the caller's number on your phone #77#@
Check the display status of the caller's number on your phone *#77#@

Questions and comments about secret codes for Nokia C6-01

Ask a question regarding Nokia C6-01 secret codes